• Insert and turn on master key - left console at bottom
• Turn on headlights - front dash left side
• Set reverser to forward - left console below master key
• The AWS will sound and later the Tilt Alarm. Acknowledge both then press red intervention reset button.
• Turn on DSD - behind fireman black switch top row
• Turn on DSD Isolation - behind firement key switch 2nd bottom row
• Turn on vigilance - behind firemen key switch left side 2nd bottom row
• Turn on AWS isolation - behind fireman key switch bottom row
• When in a speed supervised zone, the blue light on the dash will illuminate
• When in a supervised zone, you can drive to enhanced speed limits
• If you exceed the speed limit by more than 3.5 mph, the TAT alarm will sound
• If you exceed the speed limit by 6 mph or more, the TAT alarm will flash and an emergency brake application will be made.
• To reset, you must reduce your speed to below the speed limit then press the red "intervention reset" button.
• Apply power and drive away

Accelerate to desired speed, then press speed set, right button next to wall above throttle.